MESH TEMPLATES

(Page 1, 2)

TABLE OF CONTENTS

2.12 oz Standard Mesh - Web | (PDF [30.1 KB])
2.8 oz Adhesive Backed Standard Mesh - Web | (PDF [30.1 KB])
6 X 5 Standard Mesh - Web | (PDF [30.0 KB])
6 X 5 Adhesive Backed Standard Mesh - Web | (PDF [30.2 KB])
6 oz Mesh - Web | (PDF [30.2 KB])
10 oz Mesh - Web | (PDF [30.2 KB])
14 oz Mesh - Web | (PDF [30.2 KB])
A-1500 Mesh - Web | (PDF [27.1 KB])
20 oz Mesh - Web | (PDF [30.2 KB])

2.12 oz Standard Mesh

Item No.    2.12 oz Standard Mesh 2.85 X 2.85  MM
Weave: Leno
Material (Tex): Warp: 32
Weft: 67
Density (counts/inch): Warp: 42
Weft: 50
Unit weight (g/m2): Raw:  
Finished product: 60±5
Content of resin: 16%
Tensile strength (N/50mm): Warp: 500
Weft: 550
Tensile strength after 28days conditioning in 5% NaOH: Warp: 50% of original
Weft: 50% of original
  1. Normal usage: EIFS Reinforcement
  2. Size of log roll: 1000mm*50m, 1000mm*100m, 1000mm*200m
    Size of jumbo roll: 1000mm*400m
    Based on order, special sizes and log rolls are also available.
  3. The data above are typical results and subject to change without notice.
  4. The products should be stored at room temperature and kept from wet and heat source.
  5. The user should take test and do trial-application on the above products before coming
    into application so as to witness and ensure suitability for user’s special purpose and technique.

2.8 oz Adhesive Backed Standard Mesh

Item No.    2.8 oz Adhesive Backed Standard Mesh 4 X 5 MM
Weave: Leno
Material (Tex): Warp: 50
Weft: 180
Density (counts/inch): Warp:  
Weft:  
Unit weight (g/m2): Raw:  
Finished product: 88±5
Content of resin: 16%
Tensile strength (N/50mm): Warp: 650
Weft: 700
Tensile strength after 28days conditioning in 5% NaOH: Warp: 50% of original
Weft: 50% of original
  1. Normal usage: EIFS Reinforcement
  2. Size of log roll: 1000mm*50m, 1000mm*100m, 1000mm*200m
    Size of jumbo roll: 1000mm*400m
    Based on order, special sizes and log rolls are also available.
  3. The data above are typical results and subject to change without notice.
  4. The products should be stored at room temperature and kept from wet and heat source.
  5. The user should take test and do trial-application on the above products before coming
    into application so as to witness and ensure suitability for user’s special purpose and technique.

6 X 5 Standard Mesh

Item No.    Standard Mesh CAG160-6 X 5
Weave: Leno
Material (Tex): Warp: 198
Weft: 198
Density (counts/inch): Warp: 6
Weft: 5
Unit weight (g/m2): Raw: 112±4
Finished product: 160±5
Content of resin: 28%
Tensile strength (N/50mm): Warp: 1200
Weft: 800
Tensile strength after 28days conditioning in 5% NaOH: Warp: 60% of original
Weft: 60% of original
  1. Normal usage: EIFS Reinforcement
  2. Size of log roll: 1000mm*50m, 1000mm*100m, 1000mm*200m
    Size of jumbo roll: 1000mm*400m
    Based on order, special sizes and log rolls are also available.
  3. The data above are typical results and subject to change without notice.
  4. The products should be stored at room temperature and kept from wet and heat source.
  5. The user should take test and do trial-application on the above products before coming
    into application so as to witness and ensure suitability for user’s special purpose and technique.

6 X 5 Adhesive Backed Standard Mesh

Item No.    Adhesive Backed Standard Mesh CAG160-6 X 5
Weave: Leno
Material (Tex): Warp: 198
Weft: 198
Density (counts/inch): Warp: 6
Weft: 5
Unit weight (g/m2): Raw: 112±4
Finished product: 160±5
Content of resin: 28%
Tensile strength (N/50mm): Warp: 1200
Weft: 800
Tensile strength after 28days conditioning in 5% NaOH: Warp: 60% of original
Weft: 60% of original
  1. Normal usage: EIFS Reinforcement
  2. Size of log roll: 1000mm*50m, 1000mm*100m, 1000mm*200m
    Size of jumbo roll: 1000mm*400m
    Based on order, special sizes and log rolls are also available.
  3. The data above are typical results and subject to change without notice.
  4. The products should be stored at room temperature and kept from wet and heat source.
  5. The user should take test and do trial-application on the above products before coming
    into application so as to witness and ensure suitability for user’s special purpose and technique.

Page 2